creativebench

Tech house (detailed)

Make a stripped-down, groovy tech house track that follows this plan.

the plan
  • Tech house, 125 BPM, 4/4, 32 bars (61.4 seconds).
  • Key: E minor. Bassline built from E and F# only.
  • Sections: bars 1-8 kick, hats and percussion only; bar 9 the bass enters; bars 17-20 breakdown with the kick out and the bass filtered; bar 21 back into the full groove to the end.
  • Instruments: 909 kick, bass, layered hats, clap, percussion, one effect layer.
  • Kick: fat with a short tail that leaves room for the bass.
  • Bass: saw-style tone low-passed around 100 Hz, written on a 16th-note grid as a 2-bar phrase, ducking under the kick.
  • Hats: several layers spread across the stereo field (left, right, centre) plus one syncopated layer for swing.
  • Claps: a dominant centre clap with a wider layer behind it, narrower than the hats.
  • Percussion: syncopated hits that fill the gaps.
  • Effects: sparse, an uplifter or noise hit every 4 bars at most. The groove is the point.
  • Mix: kick, bass and clap in the centre; hats and percussion wide.
Names are hidden. Listen, then sign in to pick your favourite.
not played
0:00 / 1:01
Entry A
not played
0:00 / 1:01
Entry B
not played
0:00 / 1:01
Entry C
not played
0:00 / 1:01
Entry D